HKS SST Fluid Cooler Kit Mitsubishi Lancer Evo X

* The product of O/C core is black_x000D_
_x000D_
[SST Fluid Cooler Kit]_x000D_
_x000D_
"Failsafe mode problem due to excessive SST fluid temperature" is the weak point of LANCER EVOLUTION X SST for sport driving. HKS SST Fluid Cooler Kit was developed to solve this problem._x000D_
_x000D_
The HKS SST Oil Cooler Kit Mitsubishi Lancer Evolution X CZ4A delivers great performance under extreme temperatures and hard driving when your engine needs it the most. This will contribute to extending the amount of driving your CZ4A which will be able to do before activating Failsafe Mode due to the transmission overheating._x000D_
HKS is releasing their new SST Oil Cooler Kit to assist in increasing the performance of engine oil. The Oil Cooler Kit helps prolong the life of internal engine components. Aggressive driving causes higher engine temperatures. Factory oil coolers are normally small water-cooled devices sandwiched between the oil filter and engine block. These are big load for the cooling system even under normal driving conditions. The new kit also offers an enhancement of thermostat to give quick engine warm up._x000D_
_x000D_
Performance_x000D_
_x000D_
Stock car is in safe mode after 10 minutes of driving due to excessive oil temperature. It took HKS SST OIL COOLER KIT installed car twice as long as to reach the temperature to enter the safe mode. A driver can concentrate on driving without concerning for the failsafe mode._x000D_
_x000D_
Kit Parts_x000D_
_x000D_
SST Fluid Pump_x000D_
Fittings_x000D_
_x000D_
Air-cooled Core (W32 9 rows) _x000D_
Brackets_x000D_
_x000D_
Hoses _x000D_
Bolts, etc._x000D_
_x000D_
Data Normal Core vs. Large Core_x000D_
_x000D_
In-house test results show that there was not big difference of oil temperature between a stock core and large core. Even adding a cooling fan did not show any improvement. However, HKS' original cooling system did significantly lower the oil temperature. HKS SST Fluid Cooler Kit is a must item for sporty driving with Lancer Evolution equipped with the SST._x000D_
_x000D_
Note for Installation_x000D_
_x000D_
Slight modification to the resin parts is required._x000D_
_x000D_
Factory fog lights can be used together._x000D_
_x000D_
HKS Intercooler can be used together._x000D_
_x000D_
Required Parts_x000D_
_x000D_
SST Oil 7L (Mitsubishi Factory SSTF-I) P/N: C0002610 (4L)_x000D_
_x000D_
2m wire (AV2.00sq / Conductor Max. Capable Temp: 80℃+)_x000D_
_x000D_
ON-OFF Switch 1 pc._x000D_
_x000D_
Relay 1 pc. (Operation Voltage: approx. 200W)_x000D_
_x000D_
Fuse Holder 1pc. (Capable Current: approx. 15A)_x000D_
_x000D_
Connector Terminals