0
MFACTORY HONDA ACCORD PRELUDE H22A F20B METAL PLATE LSD DIFFERENTIAL - 1.5/2.0 WAY
982,55 HT
1 179,06 € TTC
Désolé, plus en stock. Dispo à la commande!
MFactory Metal Plate Limited Slip Differential. Gain a prominent advantage over the competition with this LSD. Through smooth and consistent distribution of power to the wheels the LSD puts power-to-the-ground and maximises your vehicles traction where conventional Torsen LSD's fail. Available in 1.0 way (acceleration only), 1.5 way (acceleration/deceleration) and 2.0 way (acceleration/deceleration). All MFactory metal plate LSD's are set at 60% lock for street/track usage.
Made from imported Japanese steel these diffs are 'forged' and 'cryo-tempered' for unsurpassed toughness. They are designed to withstand the extreme shock loads of competition-level drag racing. Advanced gear geometry designed using industry-leading software puts more power to the ground and the highest quality Brighton-Best hardware is used. Coil spring preload system ensures minimal powerloss and maximum response. Lower initial pressure ensures maximum durability and chatter-free operation. Fully re-buildable with adjustable lock (60-100%) and option of different cam type.
When installing your MFactory Metal Plate LSD, only use Torco Manual Transmission Fluid (MTF). This is the only oil. MFactory recommend. It is also recommended to install new diff bearings.
*BREAKING IN PROCEDURE - Figure-of-8 for around 15-30mins.
*WARM UP - The transmission should be warmed up for 15 minutes before going on track.
Made from imported Japanese steel these diffs are 'forged' and 'cryo-tempered' for unsurpassed toughness. They are designed to withstand the extreme shock loads of competition-level drag racing. Advanced gear geometry designed using industry-leading software puts more power to the ground and the highest quality Brighton-Best hardware is used. Coil spring preload system ensures minimal powerloss and maximum response. Lower initial pressure ensures maximum durability and chatter-free operation. Fully re-buildable with adjustable lock (60-100%) and option of different cam type.
When installing your MFactory Metal Plate LSD, only use Torco Manual Transmission Fluid (MTF). This is the only oil. MFactory recommend. It is also recommended to install new diff bearings.
*BREAKING IN PROCEDURE - Figure-of-8 for around 15-30mins.
*WARM UP - The transmission should be warmed up for 15 minutes before going on track.
16 autres produits dans la même catégorie :
SYNCHROTECH HONDA B16 B18...
SYNCHROTECH HONDA B16 B18 CABLE Y1 S1 1ST-2ND CARBON SYNCHRO...
Prix
423,68 €
EXEDY STANDARD AFTERMARKET...
EXEDY STANDARD AFTERMARKET PRODUCT CONCENTRIC SLAVE CYLINDER
Prix
113,73 €
Brian Crower Bielle SEULE -...
ONE ONLY CONNECTING ROD - ProH625+ w/ARP Custom Age 625+...
Prix
348,55 €
- Nouveau
EXEDY RACING CARBON-D HEAVY...
EXEDY RACING CARBON-D HEAVY DUTY TWIN CLUTCH & FLYWHEEL KIT...
Prix
3 177,31 €
Supertech Cam Follower 35mm...
Supertech Cam Follower 35mm Diameter 26mm Long 14.7mm Post...
Prix
53,30 €
Supertech 7mm Intake Valve...
Supertech 7mm Intake Valve Stem Seal For Volkswagen/Audi CPRA
Prix
1,03 €