DCT Cooler Kit for GT-R R35 is available now. _x000D_
From the street to race circuits, the HKS DCT Cooler Kit for the GT-R has been developed to provide firm and positive shift engagement while assisting in the prevention of overheating the clutch and transmission. By stabilizing and maintaining lower oil temperatures in the transmission, the life cycle of the oil is extended. Integrated with the factory water-cooled transmission cooler and the DCT Cooler Kit also assists in reducing the GT-R's overall water temperature._x000D_
_x000D_
Features_x000D_
_x000D_
Placement of the DCT cooler core to the front left fender maximizes cooling performance._x000D_
_x000D_
Fiber Reinforced Polymer (FRP) air duct specially designed for R35 GT-R is included to enhance air flow to the core._x000D_
_x000D_
A larger -10 size oil line reduces resistance in pipes and increases flow ensuring proper oil supply._x000D_
_x000D_
The transmission's stock heat exchanger and HKS thermostat are integrated into the DCT Cooler. With a specially designed oil outlet attachment, stabilizing the oil temperature occurs in a shorter amount of time. Improved shifts are noticeable even after cold starts._x000D_
_x000D_
During testing at Fuji Speedway, the water temperature was reduced by an average of 5°C (9°F) enabling continuous laps at a constant oil temperature of 127°C (260°F)._x000D_
_x000D_
[Trivia of DCT(DUAL CLUTCH TRANSMITION) GR6]_x000D_
_x000D_
Factory cooling type is a water-cooled transmission cooler._x000D_
_x000D_
Fuel safe activates when oil temperature reaches at 140℃-145℃._x000D_
_x000D_
Nissan recommends changing engine oil when oil temperature exceeds 140℃._x000D_
_x000D_
Even if transmission oil is below 140℃, when the 4WD clutch temperature rises, the drive mode is switched to 2WD. (Warning message appears: The warning is appears when oil temperature of drive-train parts is raised abnormally and improper revolution difference between the front and rear wheels occurs and continues for a certain amount of time.)
