HKS Belt Upgrade Timing 3S-G T E 177Y
157,50 HT
189,00 € TTC_x000D_
Belt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine_x000D_
_x000D_
Previous timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, will allow the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine._x000D_
_x000D_
Teeth rubber is made from H-NBR grade rubber for additional strength._x000D_
_x000D_
Balancer belt for 4G63 is also available. By combining both timing belt and balancer belt, the load and stress can be reduced for both engine and chassis_x000D_
_x000D_
HKS Fine Tune Timing Belt" title="HKS Fine Tune Timing Belt" width="700" height="220" />_x000D_
_x000D_
Necessity of Changing the Balancer Belt_x000D_
_x000D_
The balancer is designed to reduce engine vibration by creating a vibration in the opposite direction to the engine. When used at high RPM such as on circuits, the vibration will naturally increase which causes more load on the balancer. Moreover, the balancer rotates at double speed of the crankshaft which will cause the belt to stretch at a faster rate compare to the other belts. This stretch will eventually put the balancer out of synchronization with the crankshaft, causing more vibration and then eventually the belt may break up. For this reason, HKS recommends that when the timing belt is changed, the balancer belt should also be changed with a strengthened item to allow the balancer for effective, accurate and reducing stress on the engine and chassis.
16 autres produits dans la même catégorie :
Supertech 28.5mm (+.5)...
Supertech 28.5mm (+.5) Inconel Exhaust Valve Honda B17A1 -...
Tein Flex Z Coilovers for...
The Tein Flex-Z range are incredible, height adjustable...
Tein Flex Z Coilovers for...
The Tein Flex-Z range are incredible, height adjustable...
SKUNK2 ULTRA STREET INTAKE...
SKUNK2 ULTRA STREET INTAKE MANIFOLD SILVER MAZDA MX5 NA/NB MIATA
Supertech Cam Follower 35mm...
Supertech Cam Follower 35mm Diameter 26mm Long 14.7mm Post...
HKS Racing Suction Kit...
HKS Racing Suction Kit Reloaded Mazda RX-8 SE3P 13B-MSP. Since...
Hardrace Rear Sway Bar...
25.4 mm 15 PCS/SETEnd links included* Focus: Not for Mk2 RS &...
HKS 2m "4 Blue Super...
HKS 2m "4 Blue Super Silicone Hose. Since their inception in...