Capacity Upgrade Kit developed by taking advantage of knowledge and experience acquired through D1 drift and time attack at Tsukuba Circuit. This kit was designed exclusively for the FA20 engine by meticulous analysis and experiment. HKS delivers this kit with "Made in Japan" quality. High performance specifications withstanding 550(ps)-50(kgf・m)!_x000D_
This kit is for people want to upgrade all the way including the engine internals._x000D_
_x000D_
Features_x000D_
_x000D_
POINT-1:PISTON KIT_x000D_
_x000D_
Carefully selected specially forged raw materials used_x000D_
_x000D_
Replacing the gasket enables both NA and turbo-charged engine users to use this kit._x000D_
_x000D_
In order to cope with the demands of high outputs, strength analysis and tests have allowed optimisation of compression ratio for flexibility of setup and high boost use._x000D_
_x000D_
Piston crown had 3D design in consideration of stock direct injection system._x000D_
_x000D_
Stock pistons skirts overhang from the block during bottom of travel. Short height pistons have revised potential issues in this area._x000D_
_x000D_
Friction, weight and other design properties to suit the needs of short height pistons._x000D_
_x000D_
POINT-2:CONNECTING ROD_x000D_
_x000D_
Specific connecting rods have been designed to suit the longer stroke. _x000D_
With no engine modifications, a special size crank pin has been set requiring new bearings. _x000D_
※The crank metals (Nissan RB26 & SR) must be purchased separately._x000D_
_x000D_
High strength I beam design and revised connecting rod bolt size._x000D_
_x000D_
POINT-3:CRANKSHAFT STROKE 90.0mm_x000D_
_x000D_
Made from HKS special forged material_x000D_
_x000D_
Perfect pin journal size was selected by merticulous analysis and experiment for extended stroke._x000D_
_x000D_
Carefully designed weights balance the engine for maximum efficiency._x000D_
_x000D_
POINT-4:Stock Bore Compatible 86.0mm_x000D_
_x000D_
In order to maintain the engine block strength, the stock bore size is maintained meaning there is no need for cylinder liners_x000D_
_x000D_
Reduces the cost of installation as liners, bore & hone and block facing processes are unnecessary
