0
HKS Gasket t:1.2 3S-G T E ok for VVTi
195,30 tax excl.
€234.36 VAT includedHKS Gasket t=1.2 3S-G T E ok for VVTi. Since their inception in 1973, HKS have committed themselves to producing aftermarket parts from high quality materials using the latest engineering processes. These products are some of the best on the market in all aspects such as appearance, sound and most notably performance!
Sorry, no items left. Available from order!
HKS Metal Head Gaskets (2301-RT044) Metal Head Gasket, Stopper Type Bore : 88mm, Comp Ratio: 8.5:1, Thickness: 1.2mm_x000D_
_x000D_
The Performance requirement from Head Gasket._x000D_
_x000D_
As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, the conditions are continually changing and the contact surface is being continually beaten. As a result, a good gasket must ensure that contact surface pressure is spread as evenly as possible and also adapt quickly to the ever changing gaps that can appear in the contact surface to maintain a good seal with good pressure._x000D_
_x000D_
STOPPER TYPE HEAD GASKET_x000D_
_x000D_
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
_x000D_
The Performance requirement from Head Gasket._x000D_
_x000D_
As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, the conditions are continually changing and the contact surface is being continually beaten. As a result, a good gasket must ensure that contact surface pressure is spread as evenly as possible and also adapt quickly to the ever changing gaps that can appear in the contact surface to maintain a good seal with good pressure._x000D_
_x000D_
STOPPER TYPE HEAD GASKET_x000D_
_x000D_
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
16 other products in the same category:
Supertech Dual Valve Spring...
Supertech Dual Valve Spring Kit 97lbs at 40.4mm Honda F22C1
Price
€781.01
EXEDY RACING SINGLE SERIES...
EXEDY RACING SINGLE SERIES STAGE 1 ORGANIC CLUTCH KIT HONDA...
Price
€326.57
Brian Crower CONNECTING...
CONNECTING RODS - ProHD w/ARP2000 7/16" Fasteners (Ford 7.3L...
Price
€3,734.45
- New