HKS Camshaft 264 IN SR20DET Step2 S14/S15 NVCS

The Pursuit of Maximum Camshaft Efficiency_x000D_
_x000D_
The concept behind the HKS camshafts was to produce something that the customers would be truly happy with. This sounds simple on the surface but this is something very challenging. When the development team looked carefully at the details, the ultimate conclusion they drew was to look at the core purpose of the cam itself (to smoothly allow air into and out of the combustion chamber) and a good cam would do this job for the maximum efficiency._x000D_
_x000D_
Variation line-up_x000D_
_x000D_
SS-CAM (STEP1)_x000D_
_x000D_
HKS SS-Cam are designed to fit unmodified cylinder heads with stock Valve Springs to be a simple bolt on cam kit that can give added performance without changing any other parts or the valve timing._x000D_
_x000D_
By changing cams, cam duration and lift is altered making the ideal valve timing different also. HKS SS-Cams have been tested on the engine bench to find the optimum valve timing and the knock pin has been relocated in a modified position to offer perfect valve timing by simply replacing stock cams with no need for measurement or adjustment._x000D_
_x000D_
STEP2 / STEP3 (Pro)_x000D_
_x000D_
STEP2_x000D_
Offering more power over SS-Cams through increased lift. However, strengthened Valve Springs (RB26 also require Piston recess modification and Cam clearance on head) are required._x000D_
_x000D_
STEP2 / STEP3 (Pro)_x000D_
Camshafts designed for further power and high rpm use over step 2. The following parts will be necessary for installation: (SR20) HKS Lash Killer Kit, Need to change the strengthened Valve Springs._x000D_
_x000D_
In addition to the "Ultimate easy installation camshaft" STEP1, "For higher rpm & Higher horsepower", STEP2/3 are re-launched._x000D_
With the latest profile design, it outperforms competitors' products._x000D_
Feel the performance._x000D_
_x000D_
*Difference of STEP3 is valve timing only._x000D_
_x000D_
Feature_x000D_
_x000D_
Target engine for both STEP2/STEP3 is more than 450ps and revolution limiter is at 8000rpm/9000rpm._x000D_
_x000D_
Test result shows it outperforms competitors products._x000D_
_x000D_
As shown on the left, the performance is improved from STEP 1 at more than 6,000 - 6,500rpm that is effective for large turbines._x000D_
_x000D_
* If turbine size is smaller than GT3037S, STEP1 camshaft is better for all rpm range._x000D_
_x000D_
Remarks_x000D_
_x000D_
STEP2_x000D_
Required parts: Valve Spring Upgrade or Head System STEP2. (Maximum rpm : 8000rpm)_x000D_
_x000D_
STEP3_x000D_
Required parts: Valve Spring Upgrade, Lash Killer Kit or Head System STEP3 (Maximum rpm : 9000rpm)_x000D_
_x000D_
The designed valve timings are targeting best balance of horsepower and torque. Valve timing can be adjusted with Slide Cam Sprocket._x000D_
_x000D_
In addition to the "Ultimate easy installation camshaft" STEP1, "For higher rpm & Higher horsepower", STEP2/3 are re-launched._x000D_
With the latest profile design, it outperforms competitors' products._x000D_
Feel the performance._x000D_
_x000D_
*Difference of STEP3 is valve timing only._x000D_
_x000D_
Feature_x000D_
_x000D_
Target engine for both STEP2/STEP3 is more than 450ps and revolution limiter is at 8000rpm/9000rpm._x000D_
_x000D_
Test result shows it outperforms competitors products._x000D_
_x000D_
As shown on the left, the performance is improved from STEP 1 at more than 6,000 - 6,500rpm that is effective for large turbines._x000D_
_x000D_
* If turbine size is smaller than GT3037S, STEP1 camshaft is better for all rpm range._x000D_
_x000D_
Remarks_x000D_
_x000D_
STEP2_x000D_
Required parts: Valve Spring Upgrade or Head System STEP2. (Maximum rpm : 8000rpm)_x000D_
_x000D_
STEP3_x000D_
Required parts: Valve Spring Upgrade, Lash Killer Kit or Head System STEP3 (Maximum rpm : 9000rpm)_x000D_
_x000D_
The designed valve timings are targeting best balance of horsepower and torque. Valve timing can be adjusted with Slide Cam Sprocket.